PRODUCTS

Build Guide

Turbo Allison - $40

A 1/10th scale 3D printed model of the Turbo Allison motor found on boats ranging from the Cooper's Express to the 1983 Miss Renault.  This is a kit containing the parts necessary to create the Turbo Allison model.  There are two variations, depending on the boat.  (Note the two build guides)   The kit is printed in white PLA, so assembly and finish work are required.
 
Weight: Updated! 4.8 oz for 1/10th scale.  (unpainted)
  Other scale sizes:  1/8th scale $65  - 1/7th scale $70  - 1/6th scale $75
Build Guide
Build Guide

Stock Allison - $30

The non-turbo charged version of the Allison motor kit in 1/10th scale.  This is the motor that launched the unlimited class back in the 1940's and for years was the go-to motor for unlimited hydroplanes.  The kit is printed in white PLA plastic.  Assembly, finish work and paint are required.
 
Weight: 3.8 oz - for 1/10th scale.
  Other scale sizes:  1/8th scale $50  - 1/7th scale $55  -  1/6th scale $60

 
Build Guide

Merlin - $30

The Merlin motor in 1/10th scale- used in a variety of hydroplanes and over time became the standard motor for the big budget teams of the piston era.  As with the other kits they come as printed PLA plastic so assembly and paint are required.
 
Weight: 3.2 oz for 1/10th scale.
  Other scale sizes: 1/8th scale $45  -  1/7th scale $50  -  1/6th scale $55
 
Build Guide

Vintage Driver - $30

A 1/10th scale 3D printed driver for the classic Vintage hydroplanes of the 1950's to 1970's.   The head and arms are two pieces that get glued together.  They both have ball/socket joints which is nice for positioning the arms and head.   The fully painted 1/10th scale driver weighs 1.2 ounces.  Look for more pictures on the Gallery page.

Add a seat and a steering wheel for $5 (any scale).   The weight in 1/10th scale with the seat and steering wheel is 1.5oz.    Note the sizes below, so you may need a slightly different scale to actually fit properly in your cockpit.

Sizing:  1/10th  3.25" tall, base is 1.5" wide,  2 5/8" at the elbows
              1/8th   4" tall, base is 1 7/8" wide, 3.25" at the elbows
              1/7th   5" tall, base is 2.25" wide, 4.5" at the elbows
              1/6th   5.6" tall, 

Other scale sizes:  1/8th - $30, 
                                 1/7th, 1:667, 1/6th - $40

Vintage Driver Bust - $15

A 1/10th scale 3D printed Vintage Driver head and shoulders, for cases where you need to mount a driver head on an existing surface.  This is separate piaces for the shoulders and head.  The head is a ball/socket mount, so it can be turned to nearly any angle.

Sizing:  1/10th: Shoulder width  1 7/8, height 1 3/4 
              1/8th:   Shoulder width 2 3/8", height 2 1/8"

Other scale sizes:  1/8th - $15, 
                                 1/7th, 1:667, 1/6th - $20
Build Guide

1973 Pay-n-Pak "Winged Wonder" - $35

A semi-scale 3D printed kit for the 1973 Pay-n-Pak.  This is the classic Winged Wonder the revolutionized hydroplane racing.  The overall size of the model is 7 inches long and 3 inches wide.  The kit includes water slide decals, the Merlin motor, and extra detail bits like a steering wheel, seat, rudder, drive line, strut, prop and a boat stand.

The kit is printed PLA plastic so assembly and paint are required.